Performance Evaluation of New Jersey’s Portable Concrete Barrier with a Pinned Configuration and Grouted Toes – Test No. NJPCB-1
Surajkumar Bhakta, Karla Lechtenberg, Ronald Faller, John Reid, Bob Bielenberg, Erin Urbank
This report documents a full-scale crash test conducted in support of a study to investigate the performance of New Jersey Department of Transportation’s (NJDOT) Precast Concrete Curb, Construction Barrier, which will be referred to as portable concrete barrier (PCB) in various configurations. This represents the first system as part of this study. The primary objective of this research effort was to evaluate the safety performance of NJDOT’s PCB, Type 4 (Alternative B) with a pinned configuration and grouted toes, corresponding to joint class C in the 2013 NJDOT Roadway Design Manual. Barrier nos. 1, 3, 5, 7, 9, and 10 were anchored to a concrete tarmac through the pin anchor recesses with nine 1-in. (25-mm) diameter by 15-in. (381-mm) long ASTM A36 steel pins inserted into 1¼-in. (32-mm) diameter drilled holes in the concrete tarmac. Non-shrink grout wedges were placed at the toe of each barrier segment in every joint between adjacent barrier segments. The barrier was evaluated according to the Test Level 3 (TL-3) criteria set forth in the Manual for Assessing Safety Hardware (MASH 2009). The research study included one full-scale vehicle crash test with a 2270P pickup truck. Following the successful redirection of the pickup truck, the safety performance of the system was determined to be acceptable according to TL-3 test designation no. 3-11 evaluation criteria specified in MASH 2009. The 1100C small car crash test was deemed unnecessary due to previous testing. The barrier successfully met MASH 2009 TL-3 criteria. This report is the first of nine documents in the nine-test series.
Highway Safety, Crash Test, Roadside Appurtenances, Compliance Test, MASH 2009, Longitudinal Barrier, Portable Concrete Barrier, PCB, Anchored, Pinned, and Barrier Curb
Other files to download